Previewed Journal Papers：
Min Huang, Pengxing Yi*, Lijun Guo,Tielin Shi. Multi-dimensional Recycling Channel Strategies of RetailerDominated Closed-loop Supply Chain for Construction Machinery Remanufacturing. Journal of Cleaner Production, 2017, under reviewing, corresponding author.
Pengxing Yi*, Peng Huang, Tielin Shi. Numerical Analysis and ExperimentalInvestigation of Modal properties for the Gearbox in Wind Turbine. Frontier of Mechanical Engineering, 2016 , 11 (4) :388-402, corresponding author.
Penxing Yi*, Min Huang, Lijun Guo and Tielin Shi. Dual Reverse Channel Decisionin Retailer Oriented Closed-loop Supply Chain for Construction MachineryRemanufacturing. Journal of Cleaner Production, 2016, 016, 124: 191-203, corresponding author. SCI Factor =4.959,
Pengxing Yi*, Min Huang, Lijun Guo and Tielin Shi. A Retailer Oriented Closed-loop Supply Chain Network Design for End of Life Construction Machinery Remanufacturing. Journal of Cleaner Production, 2016, 137: 1393-1405, corresponding author. SCI Factor = 4.959.
Min Huang, Pengxing Yi*, Tielin Shi, Lijun Guo. A modal interval based method for dynamic decision model considering uncertain quality of used products in remanufacturing. Journal of Intelligent Manufacturing, 2015, DOI 10.1007/s10845-015-1151-4, corresponding author. SCI Factor = 1.731
Kang Zhang, Pengxing Yi*, Xuming Zhang, Yahui Li, and Bing Hui. A new method to evaluate the surface defects with the EMAT. Sensors, 2015, 15 (7): 17420-32, corresponding author. SCI Factor =2.245
Chao Jin, Youmin Hu, Bo Wu, Pengxing Yi*, Yao Cheng. Thermal characteristics prediction of a CNC feed system under varying operating conditions. Precision Engineering, 2015, 42: 151-164. SCI Factor = 1.517
Pengxing Yi*, Cheng Zhang, Lijun Guo and Tielin Shi. Dynamic Modeling and Analysis of Load Sharing Characteristics of Wind Turbine Gearbox. Advances in Mechanical Engineering, 2015, 7 (3): 1687814015575960 corresponding author. SCI Factor = 0.575
Yi Pengxing*, Dong Lijian, Shi Tielin. Multi-objective genetic algorithms based structural optimization and experimental investigation of the planet carrier in wind turbine gearbox. Frontier of Mechanical Engineering, 2014, 9(4): 354-367.
Pengxing Yi*, Kang Zhang, Yahui Li, Xuming Zhang. Influence of the Lift-Off Effect on the Cut-Off Frequency of the EMAT-Generated Rayleigh Wave Signal. Sensors, 2014, 14(10): 19687-99. SCI Factor= 2.245.
Yi Pengxing，Zhang Cheng. A Simulation Study of Errors on Planet Load Sharing and Sun Gear Track of Wind Turbine Gearbox. Equipment manufacturing technology，2014，3：25-28. In Chinese
Yi Pengxing，Du Heng，Lu Huanan，Lai Wuxing. Ｒesearch and Application of Automatic Bottom Bobbin Changer for Industrial Sewing Machine. Machine Tool and Hydraulics，2014，42 (21)：33-35，41. (In Chinese)
Minyu Li, Bo Wu, Youmin Hu, Pengxing Yi*, Yao Cheng. An improved discrete particle swarm optimization algorithm for High-speed trains’ operation panel assembly sequence planning. Assembly Automation, 2013, 33(4): 360-373, corresponding author. SCI Factor= 0.913
Feng Xiong, Fengling Han, Pengxing Yi, Tielin Shi. Model of the steady configuration of moving webs nearby a pulley and its solution, Journal of Huazhong University of Science and Technology (Nature Science Edition), Vol. 37, No. 10, 2009, pp. 89-92. EI (In Chinese)
Feng Xiong, Fengling Han, Pengxing Yi, Tielin Shi. Steady configuration of moving strip around a pulley, China Mechanical Engineering, Vol.20, No.19, 2009, PP. 2358-2362. (In Chinese)
Pengxing Yi, Shiyuan Liu, Feng Cui, Youmin Hu. Three dimensional design and optimization system for stirring blades with complicated surface by flow field simulation, Journal of Astronautics, Vol.30, No.1, 2009, PP.76-81 SCOPUS, CSCD (In Chinese)
Pengxing Yi, Youmin Hu, Feng Cui, Shuzi Yang. Numerical analysis on effects of helix angle of stirring paddle on mixing performance of vertical kneading machine, Journal of Solid Rocket Technology, Vol. 30, No. 5 2008, pp.381-385. EI (In Chinese)
Pengxing Yi, Youmin Hu, Feng Cui, Runsheng Du, Shuzi Yang. Numerical investigation of effect of kneading clearance on mixing performance of vertical kneading mixers, Journal of Chemical Industry and Engineering (China), Vol. 58, No.10, 2007, pp. 2680-2684.EI, CSCD (In Chinese)
Yi Pengxing，Hu Youming，Yang Shuzi，et al. System reliability analysis of redundant condition monitoring systems. In：Pro.of the first international symposium on digital manufacture，Journal of Wuhan University of Technology, Wuhan，China，2006，Vol.28：561-564. EI, CSCD
Yi Pengxing，Yang Shuzi，Du Runsheng，et al. Distributed monitoring system reliability estimation with consideration of statistical uncertainty. Chinese Journal of Mechanical Engineering (English Edition)，2005，18(4): 519-524. EI,CSCD
Pengxing Yi, Shuzi Yang, Runsheng Du, et al. Distributed monitoring system reliability estimation with consideration of statistical uncertainty, Chinese Journal of Mechanical Engineering (English Edition), Vol. 18, No.4, 2005, pp.519-524.
Pengxing Yi, Runsheng Du, Shiyuan Liu, Shuzi Yang. Study on Markov model based reliability for distributed monitoring system, Chinese Journal of Mechanical Engineering, Vol.41, No.6, 2005, PP.143-148. (In Chinese)
Pengxing Yi, Runsheng Du. Design and implement of constant temperature water supply system for kneading machinery. Water & Wastewater Engineering, 2003, Vol.29 No.10 pp.97-99. CSCD (In Chinese)
Previewed Conference Papers
 Min Huang, Pengxing Yi*, Lijun Guo, Tielin Shi. A Modal Interval Based Genetic Algorithm for Closed-loop Supply Chain Network Design under Uncertainty. In: Proceedings of MIM2016, Jun 28- Jul 1,2016, Troyes, France, IFAC-PapersOnLine,2016, 49-12: 616–621, corresponding author. EI
Min Huang, Pengxing Yi, Tielin Shi. Multi-dimensional Reverse Channel Decision under Different Collection Strategies. In: Proceedings of INCOM 2015, May 9 – 15 2015, Ottawa, Canada, IFAC-PapersOnLine, 48-3, p.p. 357-361, Corresponding author. EI
Pengxing Yi, Junfeng Wang, Tao Huang and Bo Wu. An autonomous learning ability based laboratory course for undergraduate students studying in measurement and control subjects. In: Proceedings of 19th International Conference on Engineering Education, July 20-24, 2015, Zagreb, Zadar (Croatia), p.p. 162-167.
Zheng Yongfeng; Hu Youmin; Wu Bo, Yi Pengxing. Finite Element Modal Analysis of Four-link Combination Portal Crane. In: Proceedings of 3rd International Conference on Mechatronics, Robotics and Automation (ICMRA), APR 20-21, 2015, Shenzhen, China, ACSR-Advances in Computer Science Research, 15: 662-665.
Kang Zhang, Pengxing Yi*, Yahui Li, Xuming Zhang and Zailin Guan. Numerical Investigation of the lift-off effect on the cut-off frequency in the Rayleigh wave. In: the Proceedings of IEEE Mechatronika/Mechatronics 2014, Dec.3rd – Dec. 5th, 2014, Brno, Czech, corresponding author. EI
Min Huang, Pengxing Yi*, Tielin Shi, Kang Zhang, and Lijun Guo. The study of multi-dimensional reverse channels for construction machinery remanufacturing. In: the 2013 IEEE International Symposium on Assembly and Manufacturing (ISAM), Jul. 30th - Aug 2nd, 2013, Xian, China, pp.116 – 119, corresponding author. EI
Pengxing Yi*, Lijian Dong, Yuanxin Chen. The multi-objective optimization of the planet carrier in wind turbine gearbox. Applied Mechanics and Materials, Vols. 184-185, 2012, pp 565-569.
Feng Xiong, Fengling Han, Pengxing Yi, Tielin Shi. Axial motion of flat belt induced by angular misalignment of rollers, 2009 IEEE International Conference on Mechatronics and Automation, In: Proc. of ICMA 2009, August 9th -12th ,2009, Changchun, China, pp. 3298-3303. EI
Yi, P.X., Liu, S.Y., Hu, Y.M., Liu, W. Reliability analysis of condition monitoring systems under fuzzy environment. Advanced Materials Research, 2008，Vol.44-46: 863-870. EI
Yi, Pengxing，Hu Youmin，Liu Shiyuan. Numerical investigation of effect of stirring blades on mixing efficiency of a planetary kneading mixer with Non-Newtonian and viscoplastic materials. AIP conference proceedings: 15th international congress on rheology - the society of rheology 80th annual meeting, Montery, USA, 2008，Vol.1027: 442-~444.
Tao Huang，Shiyuan Liu，Pengxing Yi，Tielin SHI. Focusing and leveling system for optical lithography using linear CCD. In: Proceeding of 2008 International Conference on Optical Instruments and Technology: Optoelectronic Measurement Technology and Applications, edited by Shenghua Ye, Guangjun Zhang, Jun Ni, 2008, Proc. of SPIE Vol. 7160: 71602X. EI
Tao Huang，Shiyuan Liu，Pengxing Yi，Tielin SHI. Automatic alignment system for optical lithography based on machine vision. SPIE Proceedings: 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Design, Manufacturing, and Testing of Micro- and Nano-Optical Devices and Systems, 2008, Proc. of SPIE Vol. 7284, 72840I. EI
Hu Youmin, Wu Bo, Yi Pengxing. Fuzzy Synthetic Evaluation Approach of Reliability for Condition Monitoring System. In: Proceedings of 1st International Conference Intelligent Robotics and Applications, Lecture Notes in Artificial Intelligence, 2008, 5315: 583-592. EI