Deng Chao

 

Professor

Phone:

Email: dengchao@hust.edu.cn

Academic Areas: Reliability Engineering, Maintenance Technology, Fault Diagnosis, Quality Management, Facility Management, Sustainable Manufacturing, Life Cycle Assessment

Chao Deng is the Professor of Mechanical Science and Engineering at Huazhong University of Science and Technology (HUST). Her research spans fault diagnosis, reliability analysis, maintenance and facility management. She also cares for quality management and sustainable development of product. She focuses on questions such as: What affects the residual useful life of devices? How to use the prediction result of degradation rules? What will we do in the facility management to assist fault diagnosis, reliability analysis and maintain. She is the project leaders of some national research grants. She is widely published in the leading scholarly journals in industrial engineering and mechanical engineering. Professor Deng teaches in many of HUST Education programs as well as Industrial Engineering electives including Management, Quality management, Project Management, Advanced Management Theory.

Academic Degrees

1988.9-1992.6 Wuhan Institute of Technology BE

1992.9-1998.6 Huazhong University of Science and Technology PhD

Professional Experience

1998.7-1999.9 Huazhong University of Science and Technology –Lecturer 

1999.10-2001.9 Tokyo Institute of Technology - Postdoctoral Research Fellow 

2001.10-2007.10 Huazhong University of Science and Technology –Associate Professor 

2007.11-present Huazhong University of Science and Technology – Professor 

2011.3-2011.9 University of Auckland – visitor professor

Selected Publications

Refereed Journal Papers

  • Chao Deng, Peigen Li, et al. “A Strategy for an Alternative CAPP System Based on the Facility Environment Model”, Journal of Huazhong University of Science & Technology, March 1997, No.25, 11-13

  • Chao Deng, Peigen Li, et al. “Research on Job Shop Scheduling Based on Alternative Process Plans”, Journal of Huazhong University of Science & Technology, March 1997, No.25, 14-15

  • Chao Deng Peigen Li, et al. “Research on Integration of Job-shop Scheduling & Process Planning”, Journal of Huazhong University of Science & Technology, March 1997, No.25, 16-17

  • Chao Deng, Peigen Li, “The application of substance flow analysis in environment”, Environmental Technology, Vol 20(4), 45-49, 2002

  • Chao Deng, Peigen Li, “The application of partial equilibrium models in environment”, Environmental Technology, No2，2004，53-55

  • Jun Wu, Chao Deng, “Research of modeling product system in LCA based on UML”, Journal of Huazhong University of Science and Technology (Natural Science Edition), Vol.32, No.4, April, 2004, 21-23

  • Zhihua Hu, Chao Deng, Mei Yao, “Error Analysis and strategy in Project Risk Analysis”, Project Management Technology, No3, 2004, 41-44

  • Tian Xia, Chao Deng, Jun Wu, “Algorithmic research of inventory analysis in life cycle assessment”, Computer Engineering and Design, Vol 26, No.7, July 2005, 1681-1683

  • Chao Deng, Tian Xia, Jun Wu, “Design and development of prototype system on product life cycle assessment”, Computer Integrated Manufacturing Systems-CIMS, Vol.11, No 9, September, 2005,  1319-1326+1332

  • Chao Deng, Xinyu Shao, Yi Zhang, Rui-Ren Zhai, “Game analysis on interfirm cooperation in networked manufacturing”, Computer Integrated Manufacturing Systems-CIMS, Vol.12, No 6, June, 2006, 929-934

  • Jun Wu, Chao Deng, Xinyu Shao, Benshan You, “PLM-oriented collaborative quality management”, Journal of Huazhong University of Science and Technology (Natural Science Edition), Vol 34, No 6, June, 2006,  74-76

  • Jun Wu, Chao Deng, Xinyu Shao, Benshan You, “Research on Enterprise Application Integration Based on Web Services”, Application Research of Computers, No.8, 2006, 64-66

  • Chao Deng, Benshan You, Jun Wu, “A Service-Oriented Architecture Collaborative Quality Management System”, Mechanical Manufacturing, No.2, 2006, 8-11

  • Xinyu Shao, Jun Wu, Chao Deng, Peigen Li, “A Web-enabled Collaborative Quality Management System”，Journal of Manufacturing Systems，Vol.25，No.2，2006，95-107

  • Chao Deng, Xianzhen Zhou, Jun Wu, Benshan You , “Research and Practice on Quality InformationModel of Product Life Cycle”, Application Research of Computers, Vol.24, No.7, July 2007, 162-164

  • Chao Deng, Tian Xia, Jun Wu, Jian Deng, “Research and development of collaborative services platform based on J2EE”, Journal of Huazhong University of Science and Technology (Natural Science Edition), Vol.35, No. 6, June, 2007, 77-80

  • Chao Deng, Xiaobin Ma, Jun Wu, Xianzhen Zhou, “Analysis technique of customers' requirements in HoQ based on rough set theory”, Computer Integrated Manufacturing Systems-CIMS, Vol.13, No.6, June, 2007, 1191-1195

  • Chao Deng, Liqin Wang, Jun Wu, “Study on integrated method of life cycle assessment and life cycle costing”, Chinese Mechanical Engineering, Vol.18, No.15, Aug 10, 2007, 1804-1809

  • Chao Deng, Benshan You, Jun Wu, “Quality evaluation system under the background of collaborative quality management”, Machinery Design & Manufacture, No.8, 2007, 192-194

  • Xinyu Shao, Chao Deng, Jun Wu and Liqin Wang, “Integration and optimization of life cycle assessment and life cycle costing for product design”, Chinese Journal of Mechanical Engineering, 2008,Vol 44, No. 9, 13-20

  • Chao Deng, Liqin Wang, Jun Wu, “Integration evaluation and optimization of LCA and LCC based on process constraints”, Computer Integrated Manufacturing Systems- CIMS, 2008,Vol14,No.8,1646-1651

  • Chao Deng, Jun Wu, Zijuan Wan, “Performance degradation model based on support vector machine”，Computer Integrated Manufacturing Systems- CIMS, 2009,Vol15,No.4,685-689

  • Jun Wu, Chao Deng, Xinyu Shao, S Q. Xie, “A reliability assessment method based on support vector machines for CNC equipment”. Science in China Series E: Technological Sciences, 2009，Vol. 52, no.7,1849-1857

  • Yuming Xu, Chao Deng, “Reliability assessment based on Bootstrap, Mechanical Design and Manufacturing”， Mechanical Design and Manufacturing, 2010, No.3,105-107

  • Yuming Xu, Chao Deng, “Reliability assessment for mechanical system based on Support Vector Machines and Bayes”, Mechanical Design and Manufacturing，2010, No. 5, 212-214

  • Chao Deng, Jun Wu, Qian Liu, “Position precision compensation method based on fuzzy control”,  Computer Integrated Manufacturing Systems- CIMS, 2010, Vol16, No.3, 628-635

  • Yuanhang Wang, Chao Deng, Yao Xiong, Jun Wu, “Mixed-expert-system-based fault diagnosis for heavy machine”, Computer Integrated Manufacturing Systems- CIMS, 2010, Vol16, No.9, 2139-2147

  • Haiping Zhu, Fanmao Liu, Yuhao Deng, Chao Deng, “Case study on analysis of horizontal machining center field failure data”, Computer Integrated Manufacturing Systems- CIMS, 2010, Vol16, No.10, 2293-2297

  • Chao Deng, Jun Wu,  Kuanmin Mao, Yao Xiong, “Process Reliability Evaluation for Large-sized CNC Machine Tools”, Computer Integrated Manufacturing Systems- CIMS, 2010, Vol16, No.10, 2250-2256

  • Jun Wu, Xinyu Shao, Chao Deng, Kuanmin Mao, “Research and Development of Equipment Reliability Prediction Based on Performance Degradation”, Computer Integrated Manufacturing Systems- CIMS, 2011,Vol17, No.1, 191-197

  • Jun Wu, Chao Deng, Xin-yu Shao, Yao Xiong. “A dynamic model-based process reliability simulation method”, Systems Engineering-Theory & Practice, 2011, Vol31, No.7, 1403-1408

  • Jun Wu, Xinyu Shao, Chao Deng, Xiaoyun Fu, “A Novel Equipment Reliability Estimation Method Based on SVR and AIS”, Chinese High Technology Letters, 2011, Vol21, No.10, 1095-1100

  • Yao Xiong, Jun Wu, Chao Deng, Yuanhang Wang, “Machining process parameters optimization method for heavy-duty CNC machine tools”, Computer Integrated Manufacturing Systems-CIMS, 2012, Vol18, No.4, 729-737

  • Zhixin Yang, Jie Zhou, Chao Deng, Xinyu Shao, “Development of a design structure matrix partitioning method towards effective design collaboration”, International Journal of Manufacturing Technology and Management,2012, Vol25, No.4, 177-190

  • Chao Deng, Jun Wu, Xinyu Shao, “Research on eco-balance with LCA and LCC for mechanical product design”, International Journal of Advanced Manufacturing Technology,2013, ISSN 0268-3768, DOI 10.1007/s00170-013-4887-z

  • Jun Wu, Chao Deng, Qiangqiang Xiong, Ming Zhao, “Reliability assessment method based on Bootstrap and SVM”, Computer Integrated Manufacturing Systems-CIMS, 2013, Vol19, No.5, 1058-1063

  • Yao Xiong, Jun Wu, Chao Deng, Yuanhang Wang, “Machining process parameters optimization for heavy-duty CNC machine tools in sustainable manufacturing”, International Journal of Advanced Manufacturing Technology, 2013, ISSN 0268-3768, DOI 10.1007/s00170-013-4881-5

  • Chao Ma, Chao Deng, Yao Xiong, Jun Wu, “An intelligent optimization algorithm based on hybrid of GA and PSO”, Computer Research and Development, 2013, vol50, No11, 2278-2286

  • Chao Deng, Yao-Zong Sun, Rong Li, Yuanhang Wang, Yao Xiong, “Hidden markov model based on the heavy-duty CNC health state estimate”, Computer Integrated Manufacturing Systems- CIMS, 2013, Vol19, No.3, 552-558

  • WANG, Yuanhang, Deng Chao, Wu Jun, Xiong Yao et al. Failure time prediction for mechanical device based on the degradation sequence. Journal of Intelligent Manufacturing, 2013, 1-19.

  • Wang Yuanhang, Deng Chao, Wu Jun, Wang Yingchun, Xiong Yao. A corrective maintenance scheme for engineering equipment. Engineering Failure Analysis, 2014, 36: 269-283.

  • C. Deng & S. Q. Xie & J. Wu & X. Y. Shao, Position error compensation of semi-closed loop servo system using support vector regression and fuzzy PID control, The International Journal of Advanced Manufacturing Technology: Volume 71, Issue 5 (2014), 887-898

  • Refereed International Conference Papers

  • Chao Deng, Peigen Li, Bin Luo. “An Integrated System of CAPP and Job Shop Scheduling”. Proceedings of the International Conference on Manufacturing Automation, Hong Kong, April 1997, 565-570

  • Chao Deng, “An Environmental strategy in industy”, Proceedings of Fourth International Symposium on Tools and Methods of Competitive Engineering(TMCE), Hubei, Wuhan, China, April 22-26, 2002, 81-97

  • Chao Deng, Peigen Li, “Some issues in LCA for manufacturing industries”, Proceedings of the International Conference on Manufacturing Automation, HongKong, December 10-12, 2002, 315-320

  • Chao Deng, Zijuan Rong, Jun Wu, and Jian Deng, “Research on collaborative quality management system”, Proceedings of International Conference on manufacturing automation(ICMA2004), Wuhan, 2004, Professional Engineering Publishing Limited, UK：607-612

  • Chao Deng, Jun Wu, Tian Xia, and Jian Deng, “Determination of boundary for product system in LCA”，Proceedings of International Conference on manufacturing automation(ICMA2004), Wuhan, 2004, Professional Engineering Publishing Limited, UK：583-590

  • Chao Deng; Zhaohui Li, Xinyu Shao, Chaoyong Zhang, “Integration and optimization of LCA and LCC to eco-balance for mechanical product design”, Proceedings of the 7th World Congress on Intelligent Control and Automation (WCICA'08), 2008,1085-1090, EI: 083911599540

  • Chao Deng, Jun Wu, and Xinyu Shao. “Reliability Assessment of Machining Accuracy on Support Vector Machine”. Proceedings of First International Conference of Intelligent Robotics and Applications (ICIRA 2008), Wuhan, China, October 2008,  669-678. Springer-Verlag Berlin Heidelberg 2008, EI：084911762361

  • Chaoyong Zhang, Qiong Liu, Fei He, Chao Deng, Xinyu Shao, “Applying genetic local search to solve the flexible job-shop scheduling problem”. Proceedings of the World Congress on Intelligent Control and Automation (WCICA'08), 2008, 3925-3928. EI: 084011606757

  • Yuming Xu, Chao Deng and Jun Wu. “Least Squares Support Vector Machines for Performance Degradation Modeling of CNC equipments”. Proceedings of International Conference on Cyber-enabled distributed computing and knowledge discovery, CyberC, Oct. 9-11, 2009, 201-206, EI: 20095312585872

  • Chao Deng, Qian Liu and Jun Wu. “A Method of Improving Position Precision Based on Fuzz Control”. Proceedings of Seventh IEEE International Conference on Control and Automation, Christchurch, New Zealand, December 9-11, 2009. 1382-1387

  • Chao Deng, Yuanhang Wang, Jun Wu, Yao Xiong. “The Design of Heavy NC Machine’s Fault Diagnosis Prototype System Based on Mixed Expert System”. 2010 International Conference on Electrical and Control Engineering (ICECE 2010). June 26-28, 2010, Wuhan, China,  5460-5463

  • Chao Deng, Yao Xiong, Yuanhang Wang, Jun Wu. “Heavy Machine Failure Maintenance Stratege Study based on FMEA”. 2010 International Conference on Electrical and Control Engineering (ICECE 2010). June 26-28, 2010, Wuhan, China, 1121-1124

  • Yuanhang Wang, Chao Deng, Yao Xiong, Jun Wu, “A Mixed Expert System for Fault Diagnosis”, Proceedings of 2010 IEEE 17th International Conference on Industrial Engineering and Engineering Management (IEEM 2010), 2010, October 29-30, Xiamen, China, 916-919

  • Chao Deng, Yuanhang Wang, Jun Wu, Yao Xiong, “The design of heavy machine's fault diagnosis prototype system based on mixed expert system”, 2010, International Conference on Mechanic Automation and Control Engineering(MACE2010), 5460-5463

  • Chao Deng, Wenlong Dong, Yuanhang Wang, Yao Xiong, “Research on fault diagnosis based on BP-SOM hybrid algorithms for NC machine” Advanced Materials Research, 2012, Vol 544, 32-37, Advances in Product Development and Reliability III

  • Chao Deng, Yao Xiong, Yuanhang Wang, Jun Wu, “A study on reliability assessment for CNC equipment” Advanced Materials Research, 2012, Vol 562-564, 903-907, Materials Engineering and Automatic Control

  • Chao Deng, Chao Ma, Yao Xiong, Yuanhang Wang, “An optimization method of the heavy machine cutting parameters” Advanced Materials Research, 2012, Vol 544, 38-42, Advances in Product Development and Reliability III

  • Chao Deng, Yuanhang Wang, Yao Xiong, Jun Wu, “Reliability assessment for CNC equipment based on multi-parameter degradation data” Advanced Materials Research, 2012, Vol 562-564, 908-912, Materials Engineering and Automatic Control

  • Jun Wu, Chao Deng, Huan Xiong, Yao Xiong, “Equipment performance degradation modeling for reliability prediction based on n-ARIMA mode” Advanced Materials Research, 2012, Vol 544, 24-31, Advances in Product Development and Reliability III

  • Chao Deng, Yao Xiong, Yuanhang Wang, Jun Wu, “Machining process parameters optimization based on grid optimization algorithm” Advanced Materials Research, 2012, Vol 562-564, 2021-2025, Materials Engineering and Automatic Control

  • Sheng Bo ,Deng Chao, Xiong Yao, Luo Zhijun ,Wang Yuanhang. Fault Diagnosis for CNC Machine Tool based on Mapping Model. Applied Mechanics and Materials, Vol. 607 (2014) .pp 739-742

  • Gang Lei, Chao Deng, Bo Sheng. Preventive maintenance optimization of availability for NC machine. Advanced Materials Research ,Vol. 988 (2014) ,pp 653-658

Courses Taught

Undergraduate teaching: Management, Huazhong University of Science and Technology, China Quality Management, Huazhong University of Science and Technology, China Project management, Huazhong University of Science and Technology, China

Postgraduate teaching: Advanced Management Theory, Huazhong University of Science and Technology, China

Centers/Programs

Research Grants：

  • Chinese National 863 High-Technology Research and Development Program，Automated production line systems and key technologies (2002AA420060），Project Leader；

  • Chinese National 863 High-Technology Research and Development Program，Demand chain management research and system development（2002AA413720），Project Sub-leader；

  • Chinese National 863 High-Technology Research and Development Program，Collaborative quality management research and system development for product life cycle (2003AA413110)，Project Leader；

  • Teaching Reform Fund of Huazhong University of Science and Technology, Teaching curriculum construction and teaching practice of  Industrial engineering discipline entirely in English (bilingual)，Project Leader；

  • Chinese National 973 Basic Research Program , Implementation process complex information processing and decision-making in digital manufacturing system（2005CB724107），Project Sub-leader；

  • Chinese National 863 High-Technology Research and Development Program，Large CNC equipment reliability modelling and assessment techniques based on dynamic characteristics research (2006AA04Z407), Project Sub-leader；

  • Chinese National Natural Science Foundation, knowledge flow-driven collaborative design methods and techniques under peer network architecture for complex mechanical product（50705032），Project Sub-leader；

  • Chinese National Science and Technology Major Project , CNC system reliability technology and reliability assessment of heavy-duty machine tools（2009ZX04014-013），Project Sub-leader；

  • Chinese National 863 High-Technology Research and Development Program，Decision support tools for MRO（2009AA043403），Project Sub-leader；

  • Chinese National Natural Science Foundation, Reliability assessment of large scale mechatronics equipment（50975109），Project Leader；

  • Chinese National 973 Basic Research Program , Multi-axis machining instability mechanism and quality control optimization for complex parts（2011CB706803），Project Sub-leader；

  • Chinese National Natural Science Foundation , Research on health assessment and residual useful life prediction for mechatronics equipment (51105156), Project Sub-leader；

  • Chinese National Key Technology Research and Development Program，Intelligent control technology and systems for safe and low-damage efficient processing（2012BAF08B00）, Project Sub-leader；

  • Fundamental Research Funds for the Central Universities，Research on health assessment and residual useful life prediction for mechatronics equipment（2013TS027），Project Leader；

  • Chinese National Natural Science Foundation， Health assessment and residual useful life prediction of CNC equipment based on map of multi-performance and multi-failure（51375181），Project Leader；

  • Chinese National Natural Science Foundation，Research on Health State Prediction and Maintenance Decision for Intelligent Manufacturing Equipment in Big Data Environment（51475189）, Project Sub-leader。

 

Patents：

  • A reliability evaluation method for NC equipments in service, 2009

  • A process reliability assessment method for large CNC machine tools, 2010

  • A reliability assessment method using multi-performance parameters of CNC equipment, 2011

  • One CNC equipment performance reliability assessment method, 2011

  • A post-failure analysis methods of complex equipment maintenance, 2011

  • A method of optimizing the heavy machine cutting parameters, 2012

 

Developed commercial software

  • A Collaborative Quality Management System, 2007

  • An Integrated Software of LCA and LCC, 2007

  • Machine Reliability  Modelling and Assessment system, 2008

  • Degradation Data Analysis Software, 2008

  • Equipments Fault Diagnosis and Reliability Analysis System, 2010

  • Ship Weaponry Performance Analysis System, 2010

  • Failure Analysis System for Rail Transportation Equipment, 2011

  • Equipment Health Status Analysis System Based on Performance Degradation, 2012

  • Equipment Maintenance Management System in Workshop, 2012

  • Reliability Data Management and Decision-making Analysis System for CNC equipments, 2014

 

School of Mechanical Science and Engineering , HUST

International Student Office China Optics Valley HuaGongTech

Address: 1037 Luoyu Road, Wuhan, China

Copyright©2017 Huazhong University of Science & Technology

简体中文