Professor
Phone:
Email: jijingjing@hust.edu.cn
Academic Areas: Field-based modeling and design, robotic-assisted rehabilitation, exoskeleton, compliant mechanisms, haptics
Ji Jingjing received the B.S. and Ph.D. degrees from the Department of Mechanical Engineering, Zhejiang University, Hangzhou, China, in 2008 and 2014, respectively. She was a visiting scholar in Georgia Institute of Technology, Atlanta,USA, during 2012-2013.She is currently a lecturer in the State Key Laboratory of Digital Manufacturing Equipment and Technology at Huazhong University of Science and Technology, Wuhan, Hubei, China. Her current research interests include field-based modeling and design, robotic-assisted rehabilitation, exoskeleton, temperature field measurement, modeling and reconstruction, compliant mechanisms and haptics.
Academic Degrees
2008.09-2014.04 Zhejiang University Doctor
2004.09-2008.06 Zhejiang University Bachelor
Professional Experience
2014.05-2016.04, worked as a Post-doctor in the State Key Laboratory of Digital Manufacturing Equipment and Technology at Huazhong University of Science and Technology, Wuhan, Hubei, China.
Selected Publications
1.Jingjing Ji, Yang Xie and Kok-Meng Lee*, “Coupled Multi-view Vision and Physics-based Synthetic Perception for 4D DisplacementField Reconstruction,” IEEE/ASME Transactions on Mechatronics, 2016, 21(2):980-992.
2.Donghai Wang, Kok-Meng Lee*and Jingjing Ji*, “A Passive Gait-Based Weight-Support Lower-Extremity-Exoskeleton with CompliantJoints,” IEEE Transactions on Robotics, 2016,32(4):931-942.
3.Jingjing Ji, Kok-MengLee*, Jiajie Guo and Shuyou Zhang, “Discrete Deformation Models forReal-time Computation of Compliant Mechanisms in Two and Three DimensionalSpace,”IEEE/ASME Transactions on Mechatronics,2014, 19(5): 1636-1650.
4.Jingjing Ji, Kok-MengLee and Shuyou Zhang*, “Cantilever snap-fits Performance Analysisfor Haptic Evaluation,” ASME Journal of Mechanical Design, 2011, 133(12): 1210041801-08.
5.Kun Bai, Jingjing Ji, Kok-MengLee* and Shuyou Zhang, “A Two-mode Six-DOF Motion System based on a Ball-joint-likeSpherical Motor for Haptic Applications,” Computers and Mathematics with Applications, 2012, 64(5): 978-987.
Awards and Honors
1 Best Paper Finalist award at the IEEE/ASME AIM Conference, 2016
2 Best Paper Finalist award at the ICIRA Conference, 2015
Courses Taught
Descriptive Geometry and Engineering Drawing (Part 1) , undergraduate
Descriptive Geometry and Engineering Drawing (Part 2), undergraduate
Basic Training in Mechanical Engineering, undergraduate
Centers/Programs
1)Thermal field reconstruction and experimental investigation of tool-chip interface based on non-contact measurements for titanium alloy machining,
2016.01-2018.12
National Natural Science Foundation of China (51505168)
Amount: ¥25,2000
2)Real-time Reconstruction of Coupled Thermal/Deformation Fields from Discrete Measurements for Thin-Walled Workpiece Machining
2014.06-2015.12
China Postdoctoral Science Foundation (2014M562012)
Amount: ¥5,0000
