Xia Qi

Professor

Phone: 027-87559544

Email: qxia@mail.hust.edu.cn

Academic Areas: Structural topology optimization, design and fabrication of biomimetic micro/nano structures

Dr. XIA Qi is currently an Professor at the School of Mechanical Science and Technology, Huazhong University of Science and Technology. He gained his B. Eng. and M. Eng. in Mechanical Engineering from Huazhong University of Science and Technology, PhD in Department of Mechanical and Automation Engineering, The Chinese University of Hong Kong. His research interests are Structural topology optimization, design and fabrication of biomimetic micro/nano structures.

Academic Degrees

2004/08—2007/09 Chinese University of Hong Kong PhD

2001/09—2004/07 Huazhong University of Science and Technology Master

1997/09—2001/07 Huazhong University of Science and Technology Bachelor

Professional Experience

2017/12 —now， Huazhong University of Science and Technology，School of Mechanical Science and Engineering，Professor

2012/11 —2017/11， Huazhong University of Science and Technology，School of Mechanical Science and Engineering，Associate Professor

2009/02—2012/10，Huazhong University of Science and Technology，School of Mechanical Science and Engineering，Lecturer

Selected Publications

[1]Q. Xia, M. Y. Wang, T. L. Shi. Topology optimization with pressure load through a level set method，Computer Methods in Applied Mechanics and Engineering, 2015, 283:177–195.

[2]Q. Xia, M. Y. Wang, T. L. Shi. A level set method for shape and topology optimization of both structure and support of continuum structures，Computer Methods in Applied Mechanics and Engineering，2014, 272:340–353.

[3]Y. Gao, T. L. Shi, Z. R. Tang, S.L. Jiang, Q. Xia（corresponding author）, Silver on nano-wrinkles as a substrate for surface-enhanced Raman scattering, Applied Surface Science, 2014, 313: 687–691.

[4]Y. Gao, T. L. Shi, H. Zheng, Z. R. Tang, Q. Xia（corresponding author）, Formation of submicron buckling patterns in thin metal film on micro-scale substrate by pyrolysis of photoresist, Thin Solid Films, 2014,550:156–163.

[5]Q. Xia, T. L. Shi, S. Y. Liu, M. Y. Wang. Shape and topology optimization for tailoring stress in a local region to enhance performance of piezoresistive sensors, Computers and Structures, 2013, 114–115:98–105.

[6]Q. Xia, T. L. Shi, S. Y. Liu, M. Y. Wang. Optimization of stresses in a local region for the maximization of sensitivity and minimization of cross-sensitivity of piezoresistive sensors，Structural and Multidisciplinary Optimization, 2013, 48: 927-938.

[7]Q. Xia, T. L. Shi, M. Y. Wang. A method for shape and topology optimization of truss-like structure, Structural and Multidisciplinary Optimization, 2013, 47:687-697.

[8]Q. Xia, M. Y. Wang, T. L. Shi. A move limit strategy for level set based structural optimization, Engineering Optimization, 2013, 45: 1061-1072.

[9]K. Wang, T. L. Shi, G. L. Liao, Q. Xia（corresponding author），Image registration using a point-line duality based line matching method, Journal of Visual Communication and Image Representation, 2013, 24:615–626.

[10]Q. Xia, T. L. Shi, S. Y. Liu, M. Y. Wang. A level set solution to the stress-based structural shape and topology optimization, Computers and Structures, 2012, 90–91:55–64.

Awards and Honors

second prize of Teaching in 2013-2014.

Courses Taught

Digital circuit, principle of microcomputers, MEMS packaging

Centers/Programs

1.NSFC Project: nano wrinkle based manufacturing of bio-mimetic hierarchical micro-nano structures （2012-2014）

2.Education ministry Project: controlled nano wrinkle based manufacturing of bio-mimetic hierarchical micro-nano structures（2012-2014）

3.Hubei Province project: A level set method for topology optimization of continuum structures with a lot of point-wise constraints and its applications（2012-2014）