Yin Zhouping

Professor

Phone: 027-87559654

Email: yinzhp@mail.hust.edu.cn

Academic Areas: Electronic manufacturing equipment and technology, Digital and intelligent manufacturing technology

Professor Yin was born in September 1972 and received the B.S. and Ph.D. degrees in mechanical engineering from the Huazhong University of Science and Technology (HUST), Wuhan, China, in 1994 and 2000, respectively. And then, he was appointed the associate professor, full professor and doctoral supervisor in 2002, 2004 and 2005, respectively. Now, He is the Vice Head of the State Key Laboratory of Digital Manufacturing Equipment and Technologyand the Vice-President of School of Mechanical Science and Engineering,HUST. He received the China National Funds for Distinguished Young Scientists Award in 2006. He has been a member of the Chang jiang Scholars Program since 2009. He was selected as one of the leading hi-tech talents by the Ministry of Science and Technology of China in 2013, and received the Ho Leung Ho Lee Innovation Award in 2014.

Prof. Yin is the secretary-generaland managing director of the artificial intelligence institute of Hubei province, the committee member of intelligent robots of Chinese Association for Artificial Intelligence, the member of ASME/IEEE. He is the member of editor board of 《Frontiers of Mechanical Engineering》 and Vibration, test and diagnosis》, and the peer reviewer of 973/863 Project, 《IEEE Trans. On Robotics & Automation》、《Computer-aided Design》、《China Science》、《Journal of Mechanical Engineering》.

He is principal investigator for projects sponsored by General Program and Major Program of National Science Foundation, National Basic Research Project of China (973). He is leading a research group and conducting research in the electronic manufacturing equipment and technology, including printed electronics and radio frequency identification (RFID) packaging. He has published more than 100 SCI/EI papers which are cited more than 300 time by other in SCI data. He published 3 monographs, is authorized more 20 invention patents. He was awarded The second prize of national technological innovation (Leader, 2013), The Second prize of National Prize of Natural Science (No.3, 2012), The Second prize of National Scientific and Technological Progress Award (No.2, 2004), and other 5 items of Province level award, "Science & Technology Award for Chinese Youth", the national outstanding postdoctoral, New Century Talent Supporting Project by education ministry, the Chinese mechanical engineering society youth science and technology achievement award.

Academic Degrees

09/1990-07/1994 Huazhong University of Science and Technology, Wuhan, China B.Eng.

09/1994-07/2000 Huazhong University of Science and Technology, Wuhan, China Ph.D.

Professional Experience

1.01/2012-present, Vice-President of School of Mechanical Science and Engineering, HUST

2.10/2006-present, Vice-President of the State Key Laboratory of Digital Manufacturing Equipment and Technology, HUST

3.10/2004-present,Professor, School of Mechanical Science and Engineering, HUST

4.07/2002-09/2004, Associate-Professor, School of Mechanical Science and Engineering, HUST

5.09/2001-12/2001, Visiting-Scholar, Department of Systems Engineering and Engineering Management, City University of Hong Kong

6.07/2000-06/2002, Post-Doctoral Research with the Postdoctoral Station of Control Science and Engineering, HUST

Selected Publications

[1]Y. Q. Zeng, B. Tao, and Z. P. Yin*, “Molecular orientation transformation of pentacene on amorphous SiO2: A computational study on the initial growth stage of physical vapor deposition,” Journal of Crystal Growth, vol. 405, pp. 73-80, Nov, 2014.

[2]Z. X. Liu, Y. A. Huang, Z. P. Yin*, S. Bennati, and P. S. Valvo, “A general solution for the two-dimensional stress analysis of balanced and unbalanced adhesively bonded joints,” International Journal of Adhesion and Adhesives, vol. 54, pp. 112-123, Oct, 2014.

[3]Z. X. Liu, Y. A. Huang, H. M. Liu, J. K. Chen, and Z. P. Yin*, “Reliable Peeling of Ultrathin Die With Multineedle Ejector,” IEEE Transactions on Components Packaging and Manufacturing Technology, vol. 4, no. 9, pp. 1545-1554, Sep, 2014.

[4]Y. A. Huang, Y. Z. Wang, L. Xiao, H. M. Liu, W. T. Dong, and Z. P. Yin*, “Microfluidic serpentine antennas with designed mechanical tunability,” Lab on a Chip, vol. 14, no. 21, pp. 4205-4212, 2014.

[5]Y. A. Huang, Y. Q. Duan, Y. J. Ding, N. B. Bu, Y. Q. Pan, N. S. Lu, and Z. P. Yin*, “Versatile, kinetically controlled, high precision electrohydrodynamic writing of micro/nanofibers,” Scientific Reports, vol. 4, Aug, 2014.

[6]Y. Q. Duan, Y. A. Huang, Z. P. Yin*, N. B. Bu, and W. T. Dong, “Non-wrinkled, highly stretchable piezoelectric devices by electrohydrodynamic direct-writing,” Nanoscale, vol. 6, no. 6, pp. 3289-3295, 2014.

[7]N. B. Bu, Y. A. Huang, Y. Q. Duan, and Z. P. Yin*, “Process Optimization of Mechano-Electrospinning by Response Surface Methodology,” Journal of Nanoscience and Nanotechnology, vol. 14, no. 5, pp. 3464-3472, May, 2014.

[8]G. H. Wu, B. Tao, and Z. P. Yin*, “Study on the shear strength degradation of ACA joints induced by different hygrothermal aging conditions,” Microelectronics Reliability, vol. 53, no. 12, pp. 2030-2035, Dec, 2013.

[9]Y. Q. Pan, Y. A. Huang, N. B. Bu, and Z. P. Yin*, “Fabrication of Si-nozzles for parallel mechano-electrospinning direct writing,” Journal of Physics D-Applied Physics, vol. 46, no. 25, Jun, 2013.

[10]Z. X. Liu, P. S. Valvo, Y. A. Huang, and Z. P. Yin*, “Cohesive failure analysis of an array of IC chips bonded to a stretched substrate,” International Journal of Solids and Structures, vol. 50, no. 22-23, pp. 3528-3538, Oct, 2013.

[11]Y. Q. Duan, Y. A. Huang, and Z. P. Yin*, “Transfer printing and patterning of stretchable electrospun film,” Thin Solid Films, vol. 544, pp. 152-156, Oct, 2013.

[12]S. S. Zeng, X. J. Wan, W. L. Li, Z. P. Yin*, and Y. L. Xiong, “A novel approach to fixture design on suppressing machining vibration of flexible workpiece,” International Journal of Machine Tools & Manufacture, vol. 58, pp. 29-43, Jul, 2012.

[13]B. Xiong, and Z. P. Yin*, “A Universal Denoising Framework With a New Impulse Detector and Nonlocal Means,” IEEE Transactions on Image Processing, vol. 21, no. 4, pp. 1663-1675, Apr, 2012.

[14]N. B. Bu, Y. A. Huang, H. X. Deng, and Z. P. Yin*, “Tunable bead-on-string microstructures fabricated by mechano-electrospinning,” Journal of Physics D-Applied Physics, vol. 45, no. 40, Oct, 2012.

[15][16] Z. P. Yin*, K. Mo, and Y. L. Xiong, “Defective point data reconstruction based on improved process of morphological operations,” Science China-Technological Sciences, vol. 54, no. 12, pp. 3166-3179, Dec, 2011.

[16]

[17] B. Peng, Y. A. Huang, Z. P. Yin*, and Y. L. Xiong, “Analysis of interfacial peeling in IC chip pick-up process,” Journal of Applied Physics, vol. 110, no. 7, Oct, 2011. [17][18] Z. P. Yin*, Y. A. Huang, N. B. Bu, X. M. Wang, and Y. L. Xiong, “Inkjet printing for flexible electronics: Materials, processes and equipments,” Chinese Science Bulletin, vol. 55, no. 30, pp. 3383-3407, Oct, 2010.

[18] J. B. Wu, Z. P. Yin*, and Y. L. Xiong, “The fast multilevel fuzzy edge detection of blurry images,” IEEE Signal Processing Letters, vol. 14, no. 5, pp. 344-347, May, 2007.

[19]Z. P. Yin, H. Ding, H. X. Li, and Y. L. Xiong, “Geometric mouldability analysis by geometric reasoning and fuzzy decision making,” Computer-Aided Design, vol. 36, no. 1, pp. 37-50, Jan, 2004.

[20]Z. P. Yin, H. Ding, H. X. Li, and Y. L. Xiong, “A connector-based hierarchical approach to assembly sequence planning for mechanical assemblies,” Computer-Aided Design, vol. 35, no. 1, pp. 37-56, Jan, 2003.

[21]Z. P. Yin, H. Ding, and Y. L. Xiong, “Accessibility analysis in manufacturing processes using visibility cones,” Science in China Series E-Technological Sciences, vol. 45, no. 1, pp. 47-57, Feb, 2002.

[22]Z. P. Yin, H. Ding, and Y. L. Xiong, “Virtual prototyping of mold design: geometric mouldability analysis for near-net-shape manufactured parts by feature recognition and geometric reasoning,” Computer-Aided Design, vol. 33, no. 2, pp. 137-154, Feb, 2001.

[23]Z. P. Yin, H. Ding, and Y. L. Xiong, “Mouldability analysis for near-net-shaped manufactured parts using freedom cones,” International Journal of Advanced Manufacturing Technology, vol. 16, no. 3, pp. 169-175, 2000.

[24]Z. P. Yin, H. Ding, and Y. L. Xiong, “Visibility theory and algorithms with application to manufacturing processes,” International Journal of Production Research, vol. 38, no. 13, pp. 2891-2909, Sep, 2000.

PS: * represents the corresponding author

Awards and Honors

2014 the Ho Leung Ho Lee Innovation Award for Chinese Youth

2013 Selected as one of the leading hi-tech talents by the Ministry of Science and Technology of China.

2009 Distinguished Professors in Changjiang Scholars

2007 Science & Technology Award for Chinese Youth

2006 National Outstanding Youth Science Fund Project

2005 the excellent center for post-doctoral studies award

2004 Be elected in New Century Talent Supporting Project by education ministry.

2003 National excellent doctoral dissertation award

Courses Taught

Undergraduate Courses:

Fundamentals of Robot

Techniques Fundamentals of Flexible electronics manufacturing technology

Postgraduate courses:

Robotics

Advanced manufacturing engineering

Centers/Programs

Leader of projects:

1.Akey project of NSFC named “Dynmic behavior and control of multiscale printing for flexible electronics”.

2.A sub-project of 973 Project named “Multiphysics control in high-density packaging”

3.A key project of 863 Project named “Development and production of RFID tag package equipments”

National Award

1.2013, The second prize of national technological innovation (Leader)

2.2012, The Second prize of National Prize of Natural Science (No.3)

3.2004, The Second prize of National Scientific and Technological Progress Award (No.2)