Academic Areas: Development of Special electromechanical equipment and embedded application system
Li Xiwen, male, born in October 1969, PhD, Professor, Doctoral supervisor, the director of Chinese Society for Vibration Engineering, the member of Testing Technology Committee of Zhongji Production Engineering Branch. From September 1987 to July 1994 in Southwest agricultural university (southwest university now), studying for bachelor's and master's degree of engineering; From February 1992 to February 1993, studying in Chongqing university; Between September 1994 and October 1998, in Huazhong university of science and technology, studying for a doctorate degree in Engineering; From March 1999 to June 2001 in Huazhong university of science and technology, working in electrical engineering post-doctoral mobile stations. From June 2001 to now working in mechanical science and engineering school of Huazhong university of science and technology; From June 2001 to December 2008 employed as associate professor of mechanical science and engineering school of Huazhong university of science and technology, since 2009, employed as professor of mechanical science and engineering school of Huazhong university of science and technology. From April 2008 to February 2013, working as the party branch secretary of electromechanical department of science and engineering school. In March 2013, employed as director of the electromechanical department of science and engineering school.
In recent years, as the project host or the project core staff, participated and completed the national major special scientific instruments and equipment project "wide spectrum of generalized elliptic partial instrument", the key project of national natural science foundation “intelligent manufacturing technology foundation”, the primary project of Climbing program "large mechanical and electrical system dynamic characteristics test, analysis and diagnosis" and the general armaments department pre-research project "fuze microminiature high bearing metal parts of microfabrication technology", aerospace science and industry group key project "The development of xxxx Liter vertical kneading machine", "super fine powder and flammable and explosive powder mixed feeder" and so on, more than 40 national defense longitudinal, horizontal topic, developed with independent intellectual property rights of the whole series vertical mixing machine equipment and production lines, develop specialty chemical production line vacuum patch, premix, pouring and curing, charging and processes more than 30 key equipments, such as plastic parts and equipment exports abroad, study of more than a set of high reliability and safety of intelligent network control system, and developed a special workplaces and high precision, high-speed intelligent controller and information integrated wireless communication system. PhD thesis win the "outstanding doctorate dissertation in Hubei province", 4 research projects of special chemical production identified through the national defense science and technology achievements appraisal hosted by the ministry of education, an achievement win the second prize of the ministry of education, science and technology progress. Applied for more than 10 invention patents, including 5 national defense patents, published more than 70 papers. Guide more than 20 graduated masters and 2 doctors (including assisted guide), guide 8 doctors and 15 masters now, guide 2 post-doctoral in cooperation.
September 1987 to July 1991 Chongqing, Southwest agricultural university (Southwest university now) Bachelor of engineering
September 1991 to July 1994 Chongqing, Southwest agricultural university (now southwest university) Master of engineering
February 1992 to February 1993 Chongqing, Chongqing university studying
In September 1994 to October 1998 Wuhan, Huazhong university of science and technology Doctor of engineering
In October 1998 to February 1999 working in Qingdao AUCMA company
In March 1999 to June 2001 Huazhong university of science and technology in electrical engineering post-doctoral mobile stations
In June 2001 to now Huazhong university of science and technology institute of mechanical science and engineering work
1) Zou Dajun, Li Xiwen, He Ruibo and et al. Based on the finite element analysis of powder dielectric constant test device developed. Journal of instruments and meters, 2013, 34 (2) : 423-427
2) Zhan Junde, Li Xiwen, Shi Tielin. The vertical kneader stirred blades surface reconstruction based on adaptive implicit T-splines: Information Science and Technology (ICIST), 2013 International Conference on, 2013[C].2013: 23-25 March 2013.
3) Zhan Xiaobin, Li Xiwen, Zou Dajun. Vertical kneading machine blade section design parameter analysis [J]. Journal of huazhong university of science and technology (natural science edition), 2013 (8) : 83-86
4) Zhan Junde ,Li Xiwen, Shi Tielin. Vertical kneading machine impeller surface of NURBS representation and the error analysis [J]. China mechanical engineering, 2013 (6) : 826-830
5) He Ruibo, Li Xiwen, Shi Tielin, and et al. A kinematic calibration method based on the product of exponentials formula for serial robot using position measurements[J]. Robotica, 2014:1-19
6) Zou Dajun, Yang Mingjin, Zhan Xiaobin, and et al. Assessment of air entrainment in stirred tanks using capacitive sensors[J]. Sensors and Actuators A: Physical, 2014: 92-101
7) Zou Dajun, Li Xiwen, Zhang Jiaqi , and et al. A powder relative dielectric constant test method and device research. Journal of instruments and meters, 2014 (02) : 368-373
8) Zhan Xiaobin, Li Xiwen, Zhang Jiaqi , and et al. Vertical kneading machine blade profile design and optimization. Solid rocket technology, 2014 (03) : 413-417
Awards and Honors
1) Ph.D. Thesis won the "outstanding doctorate dissertation in Hubei province"
2) Solid propellant kneading intelligent control system project by the ministry of education science and technology progress second prize
Undergraduate courses: Engineering testing technology
Graduate courses: Engineering test and signal analysis; Mechanical electronic system analysis and design
Current research in the scientific research project
1)Project Name: HMX sieving device
2)Project name: Engine thermal barrier strips automatically principle prototype design
3)Project name: *** mixer argumentation and design
4)Project name: Burning rate underwater acoustic emission instrument research and development
5)Project name: PXI test system is developed
Authorization for a patent for invention
6) Shi Tielin,Li Xiwen ,Zhan xiaobin , Zhao Xumei,Zhan Junde,Zhang Jiaqi . A blade of three blades vertical kneading machine. Open (announcement) : CN101954255A, 2011-01-26.
7) Shi Tielin,Li Xiwen ,Zhan xiaobin ,Zhan Junde ,Zhang Jiaqi , Zou Dajun, Feng Luyi. A material dynamic sealing device. Open (announcement) number: CN101988592A, 2011-03-23.
8)Li Xiwen, Shi Tielin, Xu Jianghua, Li Yuan, Zhan Xiaobin, Wang Wenyun, Xiong Hongxia, Guo Fang. A powder feeding device. Open (announcement) number: CN102616501A, 2012-08-01
Authorized national defense patent
1) Shi Tielin, Li Xiwen, Lu Wei, Zhan Xiaobin. A triple screw transmission chain of vertical kneading machine. The defense invention patent, patent number: ZL 201110011316.7. Authorization of the patent for utility model 1) Li Xiwen ,Shi Tielin, Lu Wei, Zhan Junde ,Zhang Jiaqi . A hose valve. Public (announcement) number: CN201802910U, 2011-04-20.
2) Shi Tielin ,Li Xiwen ,Zhan Xiaobin, Zhan Junde, Zhang Jiaqi, Zou Dajun, Feng Luyi. A material dynamic sealing device. Open (announcement) number: CN201901267U, 2011-07-20.
3) Shi Tielin, Li Xiwen, Lu Wei, Zhang Jiaqi, Si Kuangshu, Li Huimin. A real-time traffic communication system. Public (announcement) number: CN202121612U, 2012-01-18.
4) Li Xiwen, Xion Hongxia, Zou Dajun, Zhan Xiaobin, Lu Wei. Multi-functional lifting tilter. Public (announcement) number: CN202400605U, 2012-08-29.
5) Li Xiwen, Li Yuan, Zhan Xiaobin, Wang Wenyun, Guo Fang, Xiong Hongxia, Fu Xiaoyan, Wu Jinxiang. A powder conveying pipe connection device. Open (announcement) number: CN202521098U, 2012-11-07.
6)Li Xiwen, Feng Luyi, Zhan Xiaobin, Yang Yili, Shi Tielin, Zhang Jiaqi, Zou Dajun. A pipe air cushion conveyer. Public (announcement) number: CN203497743U, 2014-03-26.
7)Li Xiwen, Yang Yili, Feng Luyi ,Zhan Xiaobin, Hong Yuan, Shi Tielin, Li Yuan. A kind of lifting mechanism with automatic limit device. Open (announcement) number: CN203582399U, 2014-05-07.
8) Li Xiwen, Shen Baojun. A pressing type skateboard. Public (announcement) number: CN203648022U, 2014-06-18.
9) Shen Baojun, Li Xiwen, Zhan Xiaobin, Zhang Peng, Huang Xin, Sun Zhibin; A kind of multi-functional alarm device. Public (announcement) number: CN203706347U, 2014.07.09.