Liu Hongqi

Academic Degrees

1996.9-2000.6 Wuhan University of Science and Engineer Bachelor

2001.9-2004.6 The Huazhong University of Science and Technology (HUST) Master

2004.9-2008.12 The Huazhong University of Science and Technology Doctor

Professional Experience

2012.3-Now：Teacher of National NC System Engineering Technology Research Center in HUST 

2009.3-2011.6：postdoctoral researchers in the manufacturing engineering institute of Tsinghua University

2000.7-2001.8：researcher in Jiangsu Kunshan Phoenix Bicycle Co. Ltd.

Selected Publications

1.Liu Hongqi,Li Bin,A parmaeterized model of bolted joints in machine tools, Intenational journal of acoustics and vibration,2014, Vol(19),10-20(SCI)

2.Liu Hongqi,Chen Qinghai, Li Bin*,Mao Xinyong,Mao Kuangming,Peng Fangyu.On-line chatter detection using servo motor current signal in turning.SCINECE IN CHINA,2011,54,3119-3129(SCI)

3.Bin Li, Feng Li Hongqi Liu*, Hui Cai,Xinyong Mao. A measurement strategy and an error-compensation model for the on-machine laser measurement of large-scale free-form surfaces. Measurement Science and Technology,(2014 SCI)

4.Bo Tan, XinyongMao, HongqiLiu*, BinLi.A thermal error model for large machine tools that considers environmental thermal hysteresis effects. International Journal of Machine Tools&Manufacture, 82-83(2014)11–20.

5.Liu Hongqi,Lian lingneng,Li Bin.An approach based on singular spectrum analysis and the Mahalanobis distance for tool breakage detection Journal of Mechanical Engineering Science (2014 SCI)

6.Mao Xinyong,Liu Hongqi&Li Bin*,Time-frequency analysis and the detect method research on the milling force token signal in the spindle current signal,Science in China Series E: Technological Sciences. 2009, 52(10): 2758-3104(SCI)

7.Liu Hongqi ,TianYing,Li Bin.A fast error measurement system for CNC machine tools based on step-gauge, 2010 2nd International Conference on Mechanical and Electronics Engineering, 2010,V2-270-274(EI)

8.Liu Hongqi, Wei Yaoqiang, Tian Hongliang, et al. Reconstruction the Milling Force Based on the Feed Motor Current Signal[C]. Proceedings of 2010 International Conference on Mechanical and Electrical Technology. Singapore: Institute of Electrical and Electronics Engineers, 2010:765-768(EI)

9.Li Bin Zhang Chen Liu Hongqi. Indirect measurement of the miling forces based on spindle motor current. Huazhong University of Science and Technology(Nature Science),2008(3),5-7（EI, in Chinese）

10.Liu Hongqi Li Bin Tang Xiaoqi Mao Xingyong. NC machining-oriented embedded - adaptive control. Huazhong University of Science and Technology(Nature Science),2009(8), 92-95（EI, in Chinese）

Awards and Honors

the first prize of Scientific and Technological Progress Award of Hubei Province, 2013, “Technology and Application of Efficient Multi-Axis NC Machining of Large Blade” (Rank 11st)

Courses Taught

Undergraduate course: “Engineering drawing”

Graduate course: “Manufacturing equipment of intelligent control technology”

Centers/Programs

Undertaken projects：

1）The National Natural Science Foundation of China (General Program), 2013.01-2015.12, The research of method of on-line monitor of NC machine performance under the state of processing. Funding: 0.8 million yuan. Principal Investigator.

2）863 project in Advanced manufacturing field, 2012.02-2015.12, The key technologies of design and manufacturing of precision horizontal machining center. Funding: 865 thousand yuan. Principal Investigator.

3）National support project, 2012.1-2014.12, Equipment and automation production demonstration application for the development of automotive and aviation industry. Funding: 7.39 million yuan. the 2nd Investigator.

4）Wuhan special science and technology program, 2013.1-2015.12, Heavy horizontal lathe milling machining center. Funding: 0.5 million yuan. Principal Investigator.

5）Research of Milling tool monitoring technology of generator shaft , Cooperate with Oriental Motor Co., Ltd. 2012.6-2013.12. Funding: 0.648 million yuan. Principal Investigator.

6）East Lake high tech project of science and technology, 2013.1-2015.12, equipment and industrialization of heavy horizontal lathe milling machining. 2013.1-2015.12. Funding: 2.7 million yuan. the 2nd Investigator.

7）The national major projects on numerical control technology, 2009.1-2011.12, Compensation technology of dynamic errors of heavy NC machine tools. Funding: 2.97 million yuan. the 3nd Investigator.

8）the national 973 program, 2013.1-2017.12, the generation and verification of function of intelligent manufacturing equipment. Funding: 8 million yuan. As a participant.

9）The national major projects on numerical control technology. 2013.01-2015.12.The innovation ability platform with key generic technology for heavy NC machine tool. Funding: 2.97 million yuan. the 4nd Investigator.

10）The national major projects on numerical control technology. 2014.1-2016.12.The machining verification platform for cylinder block of gasoline engine and cylinder header. Funding: 3.39 million yuan. the 2nd Investigator.

Granted patents：

• A monitoring method for stability of CNC turning machine.（Patent No.: ZL 201110045763.4）

• A device for automatically measuring errors of CNC lathe.（Patent No.: ZL 200710168723.2）

• A device for automatically measuring errors of CNC milling machine（Patent No.: ZL 200710168724.7）

• A monitoring system for machining performance of CNC machine.（Patent No.: ZL 200810048524.2）

• A monitoring method for NC machine tool wear.（Patent No.: ZL 201010607532.3）

• A monitoring system for CNC machine tool wear based on self-learning method in manufacturing process. (Patent No.: ZL 201010607535.7)